Coil Pipe Trailer Specification

PE Pipe Capacity

• A Frame: welded standard duty 6" C-Channel.



• Main Frame/Space Frame: welded mainly 2" x 4" x 3/16" Steel Tube Twin central uprights and sliding block assemblies allow the coil support spider wheels to be easily moved into the desired position.



• 3" I.D. Lunette Eye with bracket (12,000 lb. Rating) for use with Pintle Hook, c/w 3/8" safety chains and 1 ton hooks. Hitch height is adjustable for level towing. Trailer breakaway unit automatically applies brakes when activated.



• Crank type jack with flat foot pad mounted on trailer tongue.



• Two support legs are mounted on rear of frame. These are used to prevent trailer rear from squatting during directional boring operations.



• The re-rounder system sits on the trailer rear platform rails during use.



• A fully opening rear gate allows the coil to be kept low to the ground during loading.



• 12 Ga. diamond pattern slip-resistant steel decking.



• An access ladder with non-skid taped steps is mounted on driver’s side of the trailer.



• A steel equipment box is mounted on the front trailer deck to hold the safety trailer breakaway unit, the hydraulic power lift system and the 12V battery.



• A separate 24" x 12" x 12" Toolbox is provided to hold the operating wrench, cargo straps, support roller bolts, instructions manuals and various other tools etc.

• TruckLite brand lights, reflectors and junction box. DOT certified system. All lights are LED or sealed beam. Wiring is heat shrunk and sealed into frame.



• Solar powered trickle charger automatically maintains charge on the 12volt battery. Direct sunlight is not required to produce sufficient power to run the trailer.

• Tandem Dexter torsion axles with E-Z lube, electric brakes and free backing arrangement for good maneuverability.



• Four trailer duty ST255-75R15C or D 15" radials, 15 x 6J rims.

• Sandblasted, acid-etched and sealed. Finish coats are Imron 96 Cat Yellow.