The lightweight pneumatically powered cutter has been specifically designed to quickly and safely make both longitudinal
and circumferential cuts in iron and steel pipe, consequently allowing a window to be cut from the pipe wall to gain access
to a previously inserted pipe.
Cutter Module
Longitudinal Cutter Module
Circumferential Cutter Module
Cuts pipe sizes from 2" diameter and larger with a maximum wall thickness up to 0.787 inches. (Standard unit handles 4"-8" diameters and cuts a 16" long window. Optional components needed for other pipe & window sizes)
Features
Cuts steel, iron, and plastic.
Accuracy of cut controlled with a digital depth gauge.
Makes longitudinal (axial) cuts from 10" to 24".
Cutting time: Approximately 30-45 minutes to cut a complete window.
Safety: Fully enclosed blade and air supply controlled by "dead-mans" handle.
Compact design: Only 5½" clearance required around pipe.
Low air consumption, requiring a minimum of 32 CFM at pressures up to 100psi.
Unit supplied complete with an air filter/lubricator.
Optional Ultrasonic Meter: Uses sound waves to measure the pipe wall thickness when unknown. The operator can accurately set the depth gauge avoiding damage to the inserted pipe.
Dimensions and Weight:
Longitudinal Module: 28lbs, 26" long x 12 ¾" wide x 5½" high (without depth gauge)
Circumferential Module: 20lbs, 14" long x 5½" wide x 5½" high.
