Advanced Control-Gas tooling technology for service-tee renewal and abandonment.
(3000 BV shown)
10 to 15 minute operation without the release of gas
The Safe-T-Stopper is specifically designed to allow for open gut, pipe tees, street tees and No Blow
service tee stopping or tee removal without hazardous release of natural gas.
Simply mount the tool over the tee, remove the cap or plug and set the expandable plug below the branch.
Gas to the service line is now stopped and renewal connections can be made. Use the same procedure to perform service cutoffs.
It's that easy!
The Safe-T-Stopper attaches to:
All Style Tees (pictured)
¾" to 2" homemade open gut service tee connections
¾", 1" & 1¼" Mueller No Blow service tee connections with or without brass completion plug
¾" to 2" street tees threaded into a welded coupling.
No Personal Protective Equipment (PPE) needed
Reduced labor cost
Closed tooling system eliminates exposure to gas
Lightweight, durable and safe
Ease of Use
One worker operation
Remove or replace service tees in minutes
Only one 9/16" wrench required
3/4" to 1 1/4" Pipe Tees with Malleable Caps
3/4"-1 1/4" Street Tees
3/4"-1 1/4" Mueller Tees
Stop Off Burn Holes in Services at the Main
Safe-T-Stopper Field Photos
Open Gut Homemade Tee with Cap Operation
Homemade Tee, no guts.
Seal is created underneath cap.
Half Collars create compression seal.
Ball valve attaches to housing.
Cap adapter removes cap.
Cap removed, gas-free.
Rubber plug inserts into throat of tee.
Gas is stopped.
Rubber plug inserted into below branch.
Tapered weld plug completes abandonment.
Homemade Tee with a Plug: Optional Platform Base Shown. Used for Over-Drilling Burn Holes
Homemade Tee with Plug
Special housing with seals provides base for ball valve.
Optional platform base provides rock steady base.
Sight glass allows operator to view inside tee.
Self Tapping Plug inserted into main hole.
Gas-Free abandonment operation complete
Open Gut Homemade Tee with Cap Operation (Platform Based used for Tees at 100 psi)