image
image

Bar Hole Seal

 Product List
Fill the void & save on costly road repairs from bar hole drilling.

Stay in good relations with your township and its residents by stopping potholes.

Bar Hole Seal
  • This new and revolutionary bar and drill hole repair and reinstatement system is a fast and permanent solution to those problematic holes.


  • With this simple cartridge dispensed two component polymeric material, holes can be filled in seconds even in wet conditions.


  • Due to the materials ingress into the substrate and bond strength it produces a plug of cured material that is flexible, hard and wear resistant (additional anti skid materials can also be added to the surface if required).


  • Provides optimum seal against surface water ingress.


  • NO WASTE, Re-sealable cartridge (replace cap after use).


  • Does not melt in summer (Like bar hole plugs).


  • Excellent abrasion resistance to traffic.
  • Three-year shelf life.


  • Permanent road repair.


  • Bonds tenaciously to Asphalt, Concrete, Brickwork and Steel.


  • Superior sealing compared to conventional Bar-Hole Plugs.

Technical Data Sheet

Typical Characteristics of Product Supplied:
Form: 2 Liquid Components
Color: Base Material: As requested
Hardener Material: Clear & Yellow
Mixed Material: Same as based
Viscosity @ 23deg C: Base Material: 1200 mPas
Hardener Material: 10000 mPas
Specific Gravity @ 23deg C: Base Material: 1.16 +/- 0.02
Hardener Material: 1.16 +/- 0.02
Mix Ratio
  By weight:
  By volume:
1 Base : 1 Hardener
1 Base : 1 Hardener
Gelation
@ 23degC: (100 gram sample)
@ 15deg C: (100 gram sample)
4 minutes
8 minutes
Abrasion Test: Weight Loss 0.26 grams
Penetration Test: 0.2mm
Typical Properties of Cured Material:
Shore 'D' Hardness: 80 (after 72 hours)
Application Temperature Range: 5-40deg C
Adhesive Properties: Bonds tenaciously to asphalt, concrete, brickwork, and steel
image
image