PLCS 2”-6” Coil Pipe Trailer
PLCS trailers are only as long as a pick-up truck (less than 17′ x 8′). They are invaluable in tight city streets yet can also lay high volumes of pipe, at high speed, across the country. The coil bay can handle PE and HDPE coils up to 54″ wide x 128″ OD x minimum 42″ ID.
Part# 73-314020-03 Twin Axle Coil Pipe Trailer complete with all attachments for use with 2” to 6” PE pipe. Includes proprietary Pipe Straightener and Re-rounder System for all pipe sizes.
Call for price.
2″-6″ Coil Pipe
The coil bay can handle coils up to 54″ wide x max. 128″ OD x min. 42″ ID. This covers all current PE pipe coils for a variety of applications such as Conduit, Gas, Water, Electric, & Telecom.
Coil Control System
End of Coil Retaining System
PE Pipe Capacity: 2″, 3″, 4″ & 6″ PE from all major manufacturers.
Maximum Coil O.D. : 128″
Minimum Coil I.D. : 42″
Coil Bay Width: 55″
Maximum Coil Width: 54″
Overall Length: 16′ 10″
Overall Width: 8′
Height with spider wheels at the lowest position: 9′ 3″
GVWR: 8600 lbs
Empty trailer weight: 3950 lbs.
Tongue Weight w/o straightener: 390 lbs.
A-Frame: welded standard duty 6″ C-Channel. Main Frame/Space Frame: welded mainly 2″ x 4″ x 3/16″ Steel Tube Twin central uprights and sliding block assemblies allow the coil support spider wheels to be easily moved into the desired position.
3″ I.D. Lunette Eye with bracket (12,000 lb. Rating) for use with Pintle Hook, c/w 3/8″ safety chains and 1-ton hooks. Hitch height is adjustable for level towing. Trailer breakaway unit automatically applies brakes when activated.
Crank type jack with flat footpad mounted on the trailer tongue.
Two support legs are mounted on the rear of the frame. These are used to prevent the trailer rear from squatting during directional boring operations.
The re-rounder system sits on the trailer rear platform rails during use.
A fully opening rear gate allows the coil to be kept low to the ground during loading.
12 Ga. diamond pattern slip-resistant steel decking.
An access ladder with non-skid taped steps is mounted on the driver’s side of the trailer.
A steel equipment box on the front trailer deck holds the safety trailer breakaway unit, the hydraulic power lift system, and the 12V battery. A separate 24″ x 12″ x 12″ Toolbox is provided to hold the operating wrench, cargo straps, support roller bolts, instructions manuals, and various other tools, etc.
TruckLite brand lights, reflectors, and junction boxes. DOT certified system. All lights are LED or sealed beam. Wiring is heat shrunk and sealed into the frame.
Solar-powered trickle charger automatically maintains the charge on the 12-volt battery. Direct sunlight is not required to produce enough power to run the trailer.
Suspension, Brakes, and Tires
Tandem Dexter torsion axles with E-Z lube hubs, electric brakes and free backing arrangement for good maneuverability.
Four trailer duty ST255-75R15C or D 15″ radials, 15 x 6J rims.
Sandblasted, acid-etched and sealed. Finish coats are Imron 96 Cat Yellow.