(856) 722-1333

Unique Products for the Gas
Distribution Engineer

(856) 722-1333

Unique Products for the Gas
Distribution Engineer

Kool Mist Coolant

Kool Mist will assure superior results and maximum safety conditions for drilling and tapping steel pipes.

Part# 46-113-65K61

Part# 46-113-65K61

Excellent for every pipeline operation:

  • Drilling
  • Tapping
  • Cutting

Kool Mist comes in concentrated 1-gallon jugs and may be diluted with water to make up to 33 gallons of mix.

Why use?

All metal cutting applications generate heat due to metal deformation and chip friction at the tool chip interface. Coolants allow for this heat to be minimized or removed from the operation. By removing the heat generated in the operation, tool life increases, and the drill finish is improved. Both coolants can help boost your output, make cutting steel easier, and extend your tool life

Kool Mist will not cause:

  • Rust
  • Stains
  • Dermatitis

Safe for People, Machines, and Parts.

No harmful chemicals.

Kool Mist contains no halogens or sulfides and is totally free of dangerous or otherwise troublesome chemicals. It is harmless to operators. Kool Mist will not cause corrosion, buildup, rancidity, or objectionable odors. Neither will it create rust or stains on parts even when diluted 32:1 with water. As a result, it sharply reduces excess wear on cutter bits and precludes problems with health and environmental agencies such as OSHA.

Biodegradeable

The Kool Mist coolant formula is biodegradable. Greatly reducing storage and disposal concerns and procedures. Coolant may be disposed of without special treatment and with no adverse environmental effect.

PLCS, LLC | 102 Gaither Drive, Unit 1 | Mount Laurel, NJ 08054

856-722-1333
info@plcsusa.com

©Copyright 2019 PLCS, LLC All Rights Reserved

Newsletter

PLCS, LLC | 102 Gaither Drive, Unit 1 | Mount Laurel, NJ 08054

856-722-1333
info@plcsusa.com

Newsletter

©Copyright 2019 PLCS, LLC All Rights Reserved