Tighten into a drilled hole in steel pipe to create a seal without shut down.

- No tapping required. Plugs cut their own threads.
- Gas-Free service renewals or abandonments used with the Safe-T-Stopper equipment.
- Hex head for easy tightening.
- Available in many sizes and lengths.

Tightened into pipe, stopping the flow of gas

Can be made with low profile in the pipe.

Viewing the main hole with the Safe T Stopper prior to inserting the correct size Self Tapping Plug.
Self Tapping Plugs – 24TPI, hardened 4140 steel (usable thread range noted) |
|
Description | Part# |
0.250″-0.350″ Hex 5/16″ (plug length 0.540″) | 54-MTP 375 |
0.375″-0.450″ Hex 5/16″ (plug length 0.540″) | 54-MTP 500 |
0.125″-0.450″ Hex 5/16″ (plug length 1.00″, pointed) | 54-MTP 500375 |
0.500″-0.580″ Hex 1/2″ (plug length 0.540″) | 54-MTP 625 |
0.625″-0.710″ Hex 1/2″ (plug length 0.540″) | 54-MTP 750 |
0.750″-0.830″ Hex 1/2″ (plug length 0.540″) | 54-MTP 875 |
0.850-1225 Hex 1/2″ (plug length 1.25″) Use with 7/8″-1 1/8″ Drill Bits | 54-MTP12501000 |
0.500″-0.710″ Double Length Hex 1/2″ (plug length 1.00″) | 54-MTP 625750 |
0.125″-0.580″ Hex 1/2″ Triple Length (plug length 1.36″, pointed) | 54-MTP 625375 |
0.625″-0.830″ Double Length Hex 1/2″ (plug length 1.00″) | 54-MTP 750875 |
0.694″-0.816″ Hex 1/2″ (plug length 0.540″) Modified Self Tapping Plug to fit through ¾” tee Typically used with Over-Drilling Assembly to handle ¾”-1 ¼” Tees |
54-MTP 875MOD |
Custom sizes available